Laboratory Centrifuges Plus

Laboratory Centrifuges model R-8C is suitable for routine sample analysis in Medical, Hospital, Pathology and Institutional laboratories. With a wide choice of rotor heads and adaptors, this unit are truly versatile.

Micro Centrifuges model RM-12C is ideal for growing routine application in biochemical and clinical labs, for Hematocrit,Corpuscle Percentage contents in blood, Serum analysis and precipitate separation etc.

Salient features :

Digital Speed Indicator
Stepless speed regulator
0-99 minutes digital countdown timer
Imbalance detector with cut off
Safety Lid interlock to prevent cover opening during centrifugation
Press Switch for quick acceleration to full speed (RM-12C)

Models		R-8C	RM-12C
Technical Data
Max. Speed	rpm	5250	16000
Max. RCF	‘g’	300	16600
Max. Capacity	ml	300	40
W x D x H	Mm	365 x 415 x 350	280 x 350 x 290

Laboratory Centrifuges model R-8C BL is suitable for routine sample analysis in Medical, Hospital, Pathology and Institutional laboratories.

Salient Features :

Stainless Steel centrifuge Chamber, easy to clean
Brushless Induction motor with variable frequency drive
Microprocessor controller with digital display
Stable speed output even under unstable voltage condition
Smooth & Soft start
Low sample temperature rise
Inverter fault detection without shutdown
7 Segment LED display of speed
Digital countdown timer & continuous run
Safety lid interlock to prevent lid opening during centrifugation
Imbalance detection & centrifugation stop with display of error
Dynamic brake for quick deceleration
Motor overload protection
Gas hinge to prevent door falling
Emergency lid lock release
Last set parameters recall (Useful for repetitive analysis)
Wide variety of rotors & reduction adaptors

Models		R-8C BL
Technical Data
Max. Speed	rpm	6000
Max. RCF	‘g’	5070
Max. Capacity	ml	400
Digital timer range	Min	0-59
W x D x H	Mm	380 x 470 x 300

Supply: 220-240 Volts 50 Hz Single Phase.

Models	Capacity	Max. Speed RPM	Max. RCF ‘g’	Max. Speed RPM	Max. RCF ‘g’	Models	Capacity	Max. Speed RPM	Max. RCF ‘g’	Max. Speed RPM	Max. RCF ‘g’
Rotor Head Listing for R-8C/R-8C BL
		R-8C BL		R-8C				R-8C BL		R-8C
Swing out Heads ( with graduated glass tubes )						Swing Heads ( with polypropylene tubes )
R-81	16×15 ml	4500	3485	4000	2750	R-83	16×15 ml	5250	4280	5250	3600
R-81 A	12×15 ml	4500	3485	4000	2750	R-83 A	12×15 ml	5250	4280	5250	3600
R-81 B	8×15 ml	4500	3440	4200	3000	R-83 B	8×15 ml	6000	4700	5250	3600
R-82	6×50 ml	4500	3530	4000	2800	R-84	6×50 ml	6000	4700	5250	3600
R-82 A	4×50 ml	4500	3485	4000	2750	R-84 A	4×50 ml	6000	4700	5250	3600
R-90 {with Bisafety cap}	4×100 ml	4000	2500	–	–	R-88	4×100 ml	6000	4550	–	–
R-90 {with Bisafety cap}	4×100 ml	4000	2500	–	–	R-89	24×51 ml	6000	5070	–	–

Models	Capacity	R-81	R-81 A	R-81 B	R-82	R-82 A	R-83	R-83 A	R-83 B	R-84	R-84 A	R-88	R-89	R-90
Reduction Adaptors for R-8C / R-8C BL
RA-151	1 x wintrob
RA-152	1 x 3ml
RA-153	1 x 5ml
RA-154	1 x 8ml
RA-155	1 x 4ml
RA-156	1 x 6ml
RA-157	1 x 50ml
RA-158	1 x 30ml
RA-160	1 x 15ml
RA-161	1 x 50ml
RA-166	1 x 15ml
RA-501	1 x 15ml
RA-502	1 x 30ml
Suitable for Falcon Tubes (without tubes)
RA-501 F	1 x 15ml
RA-160F	1 x 15ml
RA-161F	1 x 50ml
Suitable for Vacutainer Tubes (without tubes)
RA-162	1 x upto 5ml (75 mm long)
RA-163	1 x upto 6ml (100 mm long)
RA-164	1 x upto 10 ml (100 mm long)
RA-167	4 x upto 6ml (100 mm long)
RA-168	3 x upto 10 ml (100 mm long)

Models	Capacity	Max. Speed RPM	Max. RCF ‘g’
RM-1210	Micro Hematocrit Rotor for 24 Capillaries (75 X 1 mm)	12000	15300
RM-1211	Micro Hematocrit Rotor for 12 capillaries (QBC -II Plus)	12000	15300
RM-1212	Heparinized capillary tubes (75mm x 1 mm bore)
RM-1213	Reading Device for RM-1210
	Angle heads
RM-1214	10 X 2ml with Glass Tubes & reduction adaptors of 1 ml & 0.5ml	16000	16600
RM-1215	24 X 1.5ml with Tapered bottom Polypropylene tubes & reduction adaptors of 1 ml & 0.4ml	11850	12715
RM-1216	8 X 5ml with round bottom Polypropylene tubes & reduction adaptors of 4ml & 2ml	11850	12715
RM-1217	4 strips of 8 X 0.2ml (PCR Strip Tubes)	12000	11910